基于智能数据采集器的研究与实现

针对目前各行业数字化、智能化产品应用日趋广泛，数据的获取、传输、分析、应用尤为重要，如何避免采集设备接口单一、功能固定、实用性差等缺点，提出采用ARM嵌入式工控模块M9080-N20为基础，采用VK3266串口芯片扩展UART串行接口，提出基于73K222AU调制解调器、HR219307变压器实现采集器二线模拟通信，并支持以太网、CAN总线和UART串行通信，可以有效解决数据远程采集、传输和控制，适用于特殊环境设备故障检测、诊断和抢修。实验结果证明，智能数据采集器不仅具有多种型号设备故障诊断功能；还能实现野外快速通信组网，不同类型设备数据远程采集、传输、分析和控制功能，在军民融合产品上具有广阔的应用前景和实用价值。     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Compton Spectrum Due to L-Shell Electrons

Compton spectrum due to L-shell electrons of thorium has been measured by the coincidence technique, using 279 keV incident gamma photons. The influence of L-shell electron momenta on the distribution of the scattered photons has been studied with reference to the Compton profile due to free electrons and compared with the exact and impulse hydrogenic theoretical models. Significant deviations are found between experimental and theoretical Compton spectra.     

Comment on ‘Ab initio study: the potential energy curves and rovibrational spectrum of low-lying excited states of HCl+ cation’ (Molecular Physics, 114:19, 2817–2823)

In a recent article, Y. Liu, X. Cheng, H. Cheng, J. Cheng and X. Song [Mol. Phys., 114:19, 2817–2823] report on the calculation of potential energy curves and the derivation of spectroscopic constants and line intensities for the lowest energy electronic states of HCl⁺. There are several shortcomings in the article; the most notable being the incorrect ordering of the ²П_3/2 and ²П_1/2 state energies, erroneous selection rules, which lead to the absence of a Q-branch in their predicted spectra, incorrect Höln–London factors, and a missing appendix.     

A model of product line design and introduction sequence with reservation utility

Cannibalization is a major concern for a firm when designing a product line. In addition, external options from outside the firm’s product line may also play a significant role. In this paper, we investigate the impact of external options, represented by reservation utility, on product line design and introduction sequence. We find that: (a) heterogeneous reservation utility defines the relative attractiveness of segments and corresponding product line; (b) reservation utility makes it more favorable to introduce products sequentially rather than simultaneously; (c) aggregating segments is an effective way to mitigate cannibalization when it becomes too difficult to manage with different values of reservation utility across multiple segments; and (d) introducing products in a non-monotone order of quality can improve profit from simultaneous introduction when the value of reservation utility of a middle segment is particularly high.     

Cousin I condition and Stein spaces

Here we give a few n-dimensional extensions of a recent result of M. Abe concerning a Cousin I characterization of two-dimensional Stein manifolds.     

NMR line‐fitting quantification of polysaccharide N‐acylurea‐based modification in glycoconjugates of Salmonella Typhi Vi polysaccharide

The polysaccharides modification via carbodiimide reaction is one of the most applied methods for obtaining conjugated vaccines against Salmonella enterica. However, N‐acylurea carbodiimide adduct generated in the process is a critical impurity in carbohydrate‐based vaccines. A quantitative NMR method was developed for assessing the N‐acylurea carbodiimide adduct impurity. The procedure was based on line‐fitting facilities for processing the NMR signals on complex spectra. The method showed good linearity, accuracy and precision under inter‐operator variation (relative standard deviation <5%). Copyright © 2017 John Wiley & Sons, Ltd.     

Real‐Time Monitoring of Transport of Chlorinated Hydrocarbons from Industrial Areas Using Open‐Path FTIR Spectrometry with COL1SB

Abstract

Open‐path Fourier transform infrared (FTIR) spectrometry was used to continuously monitor 11 chlorinated hydrocarbon species in the region connecting two different industrial complexes for 24 hr. The single‐beam spectra obtained from open‐path FTIR were analyzed by newly developed software named COL1SB, which generates site‐specific background spectra as well as path‐averaged water vapor concentrations in addition to performing regression analyses. The path‐averaged water vapor concentrations calculated by the COL1SB agreed very well with those measured by a thermo‐hygrometer. In addition, site‐specific background spectra were generated by accounting for chemical absorption of 50 chemical species. The accurate estimation of path‐averaged water vapor concentrations, as well as the usage of site‐specific background spectra, enables chlorinated hydrocarbons to be measured by open‐path FTIR spectrometry at the ppb level. Among 11 chlorinated hydrocarbons considered here, trichlorofluoromethane, carbon tetrachloride, trichloroethylene, and tetrachloroethylene were identified as major chlorinated hydrocarbons having concentrations above 1 ppb. Wind affected the temporal variations of these chlorinated hydrocarbons, indicating the importance of local transport. However, the effect of wind differed from one species to another because of different source characteristics.     

Where the rubber meets the hand: Unlocking the sensing potential of dielectric elastomers

Practice makes perfect to some extent. Research has shown that musicians who practice the piano for long periods of time can suffer a range of hand problems from loss of control to diminished speed. Now imagine a rubber keyboard that is springy, soft, and elastic. This is the new type of input device that dielectric elastomers (DE) can create. However their usage in large sensing systems is limited by a scalability challenge. Each DE sensor is married to a pair of connection cables and electronics, adding to the complexity of the background overheads. A new efficient multi‐frequency method is presented that is capable of detecting internal pressure changes from a difference in the DE's capacitance without the need for any additional wires or connections. This effectively segments the DE into smaller sections, achieving information from a single sensor equivalent to multiple sensors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 465–472